Triumph Rocket III Classic Service Manual page 258

Fuel System/Engine Management
Fuel pump operation: This test provides you with the
means to physically check the pump operation. DTCs are
set if a malfunction is found. The pump is energised when
the test is confirmed and ended when the Validation key
'*'
is pressed for a second time.
Second throttle stepper: A signal is sent which should
cause the second throttle stepper motor to be driven to
the fully closed position, then to fully open. DTCs are set if
a malfunction is found.
By pressing the Validation key '*', your selection will be
noted and 'FUNCTION TEST' (operation
23)
will be
displayed.
Press the Help key
(?)
for more information.
Note:
• If the Return key (Jl is pressed, the tool will
return to 'DIAGNOSTICS' menu (operation 17),
23 FUNCTION TEST
F
U N [ T I ON
T E 5 T
I N 5 T R U
fI
E N T P R
N E L
~p
R 0 [
E E 0
[ R N
[
E L
~
I~f
The function selected at operation 22 will now show on
line 2. To show an example of this, we have chosen the
'INSTRUMENT PANEL' test.
If you press the Help key
(?)
help relating
to
the specific
test will be given. In this example, the screen will now
read
TACHOMETER - 7500 RPM
TEMP GAUGE - not fitted, test will illuminate
High Temp warning light
SPEEDOMETER - 100 km/h*
* Or the imperial equivalents.
(
(
If you wish to cancel that selection, scroll to 'CANCEL' and
press the Validation key
'*'.
The display will return to (
operation 22
If you wish to test the component selected, scroll to
'PROCEED' and press the Validation key
'*'.
11.54
Service Manual - Rocket Ill/ Classic I Touring