Table of Contents
Advertisement
Frame and Bodywork
Installation
1.
Position the left hand pannier rail to the frame.
Align the fixing holes in the pannier rail to those in
the frame.
2.
Fit the front fixings and tighten to 22 Nm.
3.
Fit the rear fixing to the3 frame and tighten to
45Nm.
Fit the rear fixings to exhaust silencer and tighten to
22Nm.
4.
Repeat for the right hand pannier rail.
5.
Position the pannier rail link. Fit the pannier rail link
fixings and tighten to 22 Nm.
6.
Position the outrigger covers. Fit the outrigger fixings
and tighten to 3 Nm.
Z
Align the pannier lower mountings to the pannier
rail.
8.
Align the two upper quick release fixings to the
pannier rail.
9.
Turn the quick release fixings one quarter turn
clockwise to the locked position.
Pannier quick release fixings locked.
Always ensure the panniers are secure and the quick
release fixings are locked. A loose or detached pannier
could cause loss of motorcycle control and an accident.
Front Mudguard - Rocket III and
Classic
Removal
Before starting work, ensure the motorcycle is stabilised
and adequately supported. This will help prevent it from
falling and causing injury to the operator or damage to
the motorcycle.
1.
Undo the fixings securing the mudguard shrouds to
the fork legs.
1. Mudguard shroud
2. Mudguard shroud fixings
3. Fork leg
2.
Detach both shrouds.
3.
Detach the brake hoses from their clips on each side
of the mudguard.
1. Brake hoses
2. Clips
17.22
SelVice Manual - Rocket Ill/ Classic / Touring
Advertisement
Chapters
Table of Contents
