Triumph Rocket III Classic Service Manual page 541

1. Fit the wheel bearings and centre sleeve using the
method described above.
cdln
Tool 3880070 in Position on Wheel
2. Fit a new circlip.
3. Lubricate and fit a new seal to the rear wheel.
Lubricate the seal's knife-edge with grease to NLGI 2
specification (we recommend Mobil HP222).
WheelslTyres
4. Refit the cush drive (see page 16-19).
5. Refit the rear wheel (see page 16-14 for Rocket III
and Classic, see page 16-17 for Rocket III Touring).
SelVice Manual - Rocket Ill/ Classic / Touring
16.21