Triumph Rocket III Classic Service Manual page 405

Exhaust System - Rocket III and
Classic
Removal
If
the engine has recently
components may be hot to the touch. Contact with the
hot components may cause damage to exposed skin.
To avoid skin damage, always allow the hot parts to cool
before working on the exhaust system.
Note:
•
In the following procedures, the term catalyst
box refers to the rectangular chamber to which
the silencers are attached. In many countries,
catalytic converters are fitted inside this
component. However, in certain countries
(depending on their exhaust emission
regulation) no catalyst will be fitted.
Note:
• Always note the position and orientation of
exhaust clamps prior to releasing them, and
return them to the noted position and
orientation on assembly.
1.
Remove the catalyst box/silencer heat shields.
f.
Heat shield
2. Heat shield flXlngs
2. Remove the seat (see page 17-17l.
3. Disconnect the battery, negative (black) lead first.
Fuel System/Engine Management
4. Release the clamps securing the silencers to the
catalyst box.
""
1.
Silencer clamp fixings
2. Catalyst box
5. Release the fixing securing the silencers to their
brackets.
2
1. Silencer bracket
2. Fixings
6. Detach the silencers from the catalyst box.
Z Collect the silencer gaskets.
8. Disconnect the oxygen sensor connection from the
wiring harness.
9. Remove the upper heat shields from the exhaust
headers.
Service Manual - Rocket
1111
Classic
1
Touring
11.201