Installation - Triumph Rocket III Classic Service Manual

Front Suspension
13. Note the position of the upper grommet. Slide the
fork upper shroud up and remove from the fork.
Note the position of the upper grommet.
1. Fork upper shroud
2. Shroud upper grommet
Care must be taken when removing the forks, to ensure
that the outer surfaces do not become scratched.
14. Slacken the bottom yoke clamp bolt and slide the
fork down out of the bottom yoke.
1.
Bottom yoke clamp
Installation
Note:
• The position of the fork is measured from the
upper surface of the bottom yoke to the top of
the fork tube, not the top of the fork cap.
1. Position the fork within the bottom yoke. Measure
from the top machined surface of the bottom yoke
to the top of the fork tube a distance of 240 mm.
Tighten the bottom yoke clamp bolt to
27 Nm.
240 mm
~-;---
2
- - - - 1
1. Bottom yoke
2. Fork tube
3. Top of fork tube
2. Refit the fork upper shroud. Ensure the upper
grommet is correctly located.
3. Refit the top yoke and tighten the top nut to
6SNm.
1
05
cets
1. Top nut
14.28
SelVice Manual - Rocket Ill/ Classic / Touring