Table of Contents
Advertisement
4.
Release the mudguard fixings and detach the
mudguard.
1. Mudguard fixings
2. Mudguard
Mudguard embellisher removal
Note:
•
To
remove
the
embellisher
from
the
mudguard, it is necessary to remove the
triangular Triumph sticker. The sticker will then
typically require replacement.
1.
Remove the star-washers from each side of the
embellisher, inside the mudguard.
cccm
1. Embellisher
2. Star washers
Frame and Bodywork
2.
Peel back the triangular Triumph sticker to reveal the
screw head beneath it.
1. Sticker
2. Screw head
3.
Release the screw to allow detachment of the
embellisher.
Embellisher assembly
....
When fitting the mudguard embellisher, it is necessary
to pull the two ends apart slightly, to avoid damage to
the mudguard painted surfaces.
1.
Position the embellisher to the mudguard, then fit
and tighten the screw to
3 Nm.
2.
Working inside the mudguard, fit star washers to
each side of the embellisher.
3.
Thoroughly clean the area beneath the Triumph
sticker.
4.
Peel the backing from a new sticker then fix it to the
space on the embellisher.
Installation
1.
Manoeuvre the mudguard into position between the
forks.
2.
Fit and tighten the mudguard fixings to
27 Nm.
3.
Position the mudguard shrouds to the forks.
4.
Fit and tighten the shroud fixings to
9 Nm.
5.
Refit the brake hoses to the clips on each side of the
mudguard.
SelVice Manual - Rocket Ill/ Classic / Touring
17.23
Advertisement
Chapters
Table of Contents
