Table of Contents
Advertisement
2.
Release the pannier quick release fixings and remove
the pannier.
~
c:
I
:::::::::::
3
2
i
~
~
1.
Quick release fixings
2. Pannier lower mountings
3. Pannier rail
3.
Remove the seat (see page 17-18).
4.
Remove the upper and lower mounting bolts and
remove the pannier rail dresser bar
1.
Pannier rail dresser bar
2. Mounting bolts
All Models
5.
Raise and support the motorcycle so that the rear
wheel is clear of the ground.
Note:
•
If both suspension units are to be removed,
place a block beneath the rear wheel to
prevent it dropping when the second unit is
removed.
6.
Slacken and remove the upper and lower mounting
bolts and washers then remove the suspension unit
from its mounting spigots.
Rear Suspension
1.
Rear suspension unit
2. Upper mounting bolts
3. Lower mounting bolts
Z
Repeat operations 1 and 6 for the other rear
suspension unit (if required).
8.
Discard all mounting bolts removed.
SelVice Manual- Rocket Ill/ Classic / Touring
13.5
Advertisement
Chapters
Table of Contents
