Torsional Damper Shaft; Removal - Triumph Rocket III Classic Service Manual

Transmission
Torsional Damper Shaft
Removal
1. Remove the engine from the frame (see page
10-2).
2. Remove the fixings securing the gear position sensor
to the torsional damper shaft housing.
3. Withdraw the sensor and collect its O-ring.
1.
Gear position sensor
2.0-ring
4. Release the bolts securing the damper shaft housing
to the crankcases.
The torsional damper shaft assembly is often a tight fit in
the crankcase. Never lever or force implements between
the crankcase and housing as this will damage both
components. Gently use a soft-faced mallet to ease the
components apart.
5. Withdraw the damper shaft assembly.
6. Collect the gear position indicator shaft from inside
the crankcase, taking care to not drop the spring and
plunger from its outer end.
1.
Gear position indicator shaft
8.12
SelVice Manual- Rocket Ill/ Classic / Touring