Triumph Rocket III Classic Service Manual page 371

( 29. Remove the three screws (rom the ECM bracket,
then detach the bracket.
1. Screws
30. Ease the relay (rom the battery box by pushing it
upwards.
1. Relay
2. Battery box
31. Disconnect the barometric pressure sensor.
"'"
1. Barometric pressure sensor
32. Lay the relay, ECM connectors and other wiring
aside.
Fuel System/Engine Management
33. Release the three screws securing the battery box
assembly to the frame.
1. Screws
2. Battery box
34. Manoeuvre the battery box assembly (rom the
motorcycle and place aside.
All Models
35. Noting their orientation, release the three clips
securing the intake plenum to the throttle bodies.
\
1. Throttle bodies
2. Clips
Service Manual - Rocket Ill/ Classic / Touring
11.167