3
Commands by Subsystem
*SAV (Save)
Command Syntax
*SAV <value>
<value> ::= {0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9}
The *SAV command stores the current state of the instrument in a save
register. The data parameter specifies the register where the data will be
saved.
See Also
•
•
92
(see
page
564)
"Introduction to Common (*) Commands"
"*RCL (Recall)"
on page 88
on page 77
Agilent 6000 Series Oscilloscopes Programmer's Reference