Function Commands - Agilent Technologies MSO6102A Programmer's Reference Manual

3
Commands by Subsystem

:FUNCtion Commands

Control functions in the measurement/storage module. See
:FUNCtion Commands"
Table 54 :FUNCtion Commands Summary
Command
:FUNCtion:CENTer
<frequency> (see
page 214)
:FUNCtion:DISPlay {{0 |
OFF} | {1 | ON}} (see
page 215)
:FUNCtion:OFFSet
<offset> (see page
:FUNCtion:OPERation
<operation> (see
page 217)
:FUNCtion:RANGe <range>
(see page 218)
:FUNCtion:REFerence
<level> (see page 219)
:FUNCtion:SCALe <scale
value>[<suffix>] (see
page 220)
212
Query
:FUNCtion:CENTer? (see
page 214)
:FUNCtion:DISPlay? (see
page 215)
:FUNCtion:OFFSet? (see
216) page 216)
:FUNCtion:OPERation?
(see page 217)
:FUNCtion:RANGe? (see
page 218)
:FUNCtion:REFerence?
(see page 219)
:FUNCtion:SCALe? (see
page 220)
on page 213.
Options and Query Returns
<frequency> ::= the current center
frequency in NR3 format. The range
of legal values is from 0 Hz to
25 GHz.
{0 | 1}
<offset> ::= the value at center
screen in NR3 format.
The range of legal values is +/-10
times the current sensitivity of the
selected function.
<operation> ::= {SUBTract | MULTiply
| INTegrate | DIFFerentiate | FFT |
SQRT}
<range> ::= the full-scale vertical
axis value in NR3 format.
The range for ADD, SUBT, MULT is
8E-6 to 800E+3. The range for the
INTegrate function is 8E-9 to
400E+3.
The range for the DIFFerentiate
function is 80E-3 to 8.0E12 (depends
on current sweep speed).
The range for the FFT function is 8
to 800 dBV.
<level> ::= the current reference
level in NR3 format.
The range of legal values is from
400.0 dBV to +400.0 dBV (depending
on current range value).
<scale value> ::= integer in NR1
format
<suffix> ::= {V | dB}
Agilent 6000 Series Oscilloscopes Programmer's Reference
"Introduction to