Trigger:spi:source:data - Agilent Technologies MSO6102A Programmer's Reference Manual

:TRIGger:SPI:SOURce:DATA

Command Syntax
:TRIGger:SPI:SOURce:DATA <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital0,..,DIGital15} for the MSO models
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :TRIGger:SPI:SOURce:DATA command sets the source for the SPI serial
data.
Query Syntax
:TRIGger:SPI:SOURce:DATA?
The :TRIGger:SPI:SOURce:DATA? query returns the current source for the
SPI serial data.
Return Format
<source><NL>
See Also •
•
•
•
•
Agilent 6000 Series Oscilloscopes Programmer's Reference
(see page 564)
"Introduction to :TRIGger Commands"
":TRIGger:SPI:SOURce:CLOCk"
":TRIGger:SPI:SOURce:FRAMe"
":TRIGger:SPI:PATTern:DATA"
":TRIGger:SPI:PATTern:WIDTh"
Commands by Subsystem
on page 332
on page 422
on page 424
on page 420
on page 421
3
423