Status - Agilent Technologies MSO6102A Programmer's Reference Manual

3
Commands by Subsystem

:STATus

Query Syntax
:STATus? <source>
<source> ::= {CHANnel<n> | FUNCtion | MATH | SBUS} for the DSO models
<source> ::= {CHANnel<n> | DIGital0,..,DIGital15 | POD{1 | 2}
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :STATus? query reports whether the channel, function, trace memory,
or serial decode bus specified by <source> is displayed.
MATH is an alias for FUNCtion.
N O T E
Return Format
<value><NL>
<value> ::= {1 | 0}
See Also
•
•
•
•
•
•
•
134
(see page 564)
| BUS{1 | 2} | FUNCtion | MATH | SBUS} for the MSO models
"Introduction to Root (:) Commands"
":BLANk" on page 109
":CHANnel<n>:DISPlay"
":DIGital<n>:DISPlay"
":FUNCtion:DISPlay"
":POD<n>:DISPlay" on page 288
":VIEW" on page 137
on page 102
on page 172
on page 188
on page 215
Agilent 6000 Series Oscilloscopes Programmer's Reference