3
Commands by Subsystem
:WAVeform:VIEW
Command Syntax
:WAVeform:VIEW <view>
<view> ::= {MAIN}
The :WAVeform:VIEW command sets the view setting associated with the
currently selected waveform. Currently, the only legal value for the view
setting is MAIN.
Query Syntax
:WAVeform:VIEW?
The :WAVeform:VIEW? query returns the view setting associated with the
currently selected waveform.
Return Format
<view><NL>
<view> ::= {MAIN}
See Also
•
•
462
(see
page
564)
"Introduction to :WAVeform Commands"
":WAVeform:POINts"
on page 449
on page 438
Agilent 6000 Series Oscilloscopes Programmer's Reference