Trigger:lin:standard - Agilent Technologies MSO6102A Programmer's Reference Manual

:TRIGger:LIN:STANdard

Command Syntax
:TRIGger:LIN:STANdard <std>
<std> ::= {LIN13 | LIN20}
The :TRIGger:LIN:STANdard command sets the LIN standard in effect for
triggering and decoding to be LIN1.3 or LIN2.0.
Query Syntax
:TRIGger:LIN:STANdard?
The :TRIGger:LIN:STANdard? query returns the current LIN standard
setting.
Return Format
<std><NL>
<std> ::= {LIN13 | LIN20}
See Also
•
•
•
•
Agilent 6000 Series Oscilloscopes Programmer's Reference
(see page 564)
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 338
":TRIGger:LIN:SIGNal:DEFinition"
":TRIGger:LIN:SOURce"
on page 332
on page 530
on page 404
Commands by Subsystem
3
405