Waveform:count - Agilent Technologies MSO6102A Programmer's Reference Manual

:WAVeform:COUNt

Query Syntax
:WAVeform:COUNt?
The :WAVeform:COUNT? query returns the count used to acquire the
current waveform. This may differ from current values if the unit has been
stopped and its configuration modified. For all acquisition types except
average, this value is 1.
Return Format
<count_argument><NL>
<count_argument> ::= an integer from 1 to 65536 in NR1 format
See Also
•
•
•
Agilent 6000 Series Oscilloscopes Programmer's Reference
(see page 564)
"Introduction to :WAVeform Commands"
":ACQuire:COUNt" on page 142
":ACQuire:TYPE" on page 148
Commands by Subsystem
on page 438
3
445