Root (:) Commands - Agilent Technologies MSO6102A Programmer's Reference Manual

3
Commands by Subsystem

Root (:) Commands

Control many of the basic functions of the oscilloscope and reside at the
root level of the command tree. See
on page 102.
Table 38 Root (:) Commands Summary
Command
:ACTivity (see
page 103)
n/a
:AUToscale
[<source>[,..,<source>]
] (see page 105)
:AUToscale:AMODE
<value> (see page 107)
:AUToscale:CHANnels
<value> (see page 108)
:BLANk [<source>] (see
page 109)
:CDISplay (see
page 110)
100
Query
:ACTivity? (see
page 103)
:AER? (see page 104)
n/a
:AUToscale:AMODE? (see
page 107)
:AUToscale:CHANnels?
(see page 108)
n/a
n/a
"Introduction to Root (:) Commands"
Options and Query Returns
<return value> ::= <edges>,<levels>
<edges> ::= presence of edges
(32-bit integer in NR1 format)
<levels> ::= logical highs or lows
(32-bit integer in NR1 format)
{0 | 1}; an integer in NR1 format
<source> ::= CHANnel<n> for DSO
models
<source> ::= {CHANnel<n> |
DIGital0,..,DIGital15 | POD1 | POD2}
for MSO models
<source> can be repeated up to 5
times
<n> ::= 1-2 or 1-4 in NR1 format
<value> ::= {NORMal | CURRent}}
<value> ::= {ALL | DISPlayed}}
<source> ::= {CHANnel<n>} | FUNCtion
| MATH | SBUS} for DSO models
<source> ::= {CHANnel<n> |
DIGital0,..,DIGital15 | POD{1 | 2} |
BUS{1 | 2} | FUNCtion | MATH | SBUS}
for MSO models
<n> ::= 1-2 or 1-4 in NR1 format
n/a
Agilent 6000 Series Oscilloscopes Programmer's Reference