Acquire:mode - Agilent Technologies MSO6102A Programmer's Reference Manual

3
Commands by Subsystem

:ACQuire:MODE

Command Syntax
:ACQuire:MODE <mode>
<mode> ::= {RTIMe | ETIMe}
The :ACQuire:MODE command sets the acquisition mode of the
oscilloscope. The :ACQuire:MODE RTIMe command sets the oscilloscope in
real time mode. This mode is useful to inhibit equivalent time sampling at
fast sweep speeds. The :ACQuire:MODE ETIME command sets the
oscilloscope in equivalent time mode.
The obsolete command ACQuire:TYPE:REALtime is functionally equivalent to sending
N O T E
ACQuire:MODE RTIMe; TYPE NORMal.
Query Syntax
:ACQuire:MODE?
The :ACQuire:MODE? query returns the acquisition mode of the
oscilloscope.
Return Format
<mode_argument><NL>
<mode_argument> ::= {RTIM | ETIM}
See Also •
•
144
(see page 564)
"Introduction to :ACQuire Commands"
":ACQuire:TYPE" on page 148
on page 138
Agilent 6000 Series Oscilloscopes Programmer's Reference