3
Commands by Subsystem
:FUNCtion:CENTer
Command Syntax
:FUNCtion:CENTer <frequency>
<frequency> ::= the current center frequency in NR3 format.
The :FUNCtion:CENTer command sets the center frequency when FFT
(Fast Fourier Transform) is selected.
Query Syntax
:FUNCtion:CENTer?
The :FUNCtion:CENTer? query returns the current center frequency in
Hertz.
Return Format
<frequency><NL>
<frequency> ::= the current center frequency in NR3 format.
After a *RST (Reset) or :AUToscale command, the values returned by the
N O T E
:FUNCtion:CENTer? and :FUNCtion:SPAN? queries depend on the current :TIMebase:RANGe
value. Once you change either the :FUNCtion:CENTer or :FUNCtion:SPAN value, they no
longer track the :TIMebase:RANGe value.
See Also
•
•
•
•
214
(see
page
564)
of legal values is from 0 Hz to 25 GHz.
of legal values is from 0 Hz to 25 GHz.
"Introduction to :FUNCtion Commands"
":FUNCtion:SPAN"
on page 222
":TIMebase:RANGe"
on page 324
":TIMebase:SCALe"
on page 327
on page 213
Agilent 6000 Series Oscilloscopes Programmer's Reference
The range
The range