Hardcopy:format - Agilent Technologies MSO6102A Programmer's Reference Manual

3
Commands by Subsystem

:HARDcopy:FORMat

Command Syntax
:HARDcopy:FORMat <format>
<format> ::= {BMP[24bit] | BMP8bit | PNG | CSV | ASCiixy | BINary
The HARDcopy:FORMat command sets the hardcopy format type.
PRINter0 and PRINter1 are only valid when printers are connected to the
oscilloscope's USB ports. (The first printer connected/identified is
PRINter0 and the second is PRINter1.)
Query Syntax
:HARDcopy:FORMat?
The :HARDcopy:FORMat? query returns the selected hardcopy format type.
Return Format
<format><NL>
<format> ::= {BMP | BMP8 | PNG | CSV | ASC | BIN | PRIN0 | PRIN1}
See Also
•
228
(see page 564)
| PRINter0 | PRINter1}
"Introduction to :HARDcopy Commands" on page 224
Agilent 6000 Series Oscilloscopes Programmer's Reference