Trigger:spi:source:frame - Agilent Technologies MSO6102A Programmer's Reference Manual

3
Commands by Subsystem

:TRIGger:SPI:SOURce:FRAMe

Command Syntax
:TRIGger:SPI:SOURce:FRAMe <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital0,..,DIGital15} for the MSO models
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :TRIGger:SPI:SOURce:FRAMe command sets the frame source when
:TRIGger:SPI:FRAMing is set to CHIPselect or NOTChipselect.
Query Syntax
:TRIGger:SPI:SOURce:FRAMe?
The :TRIGger:SPI:SOURce:FRAMe? query returns the current frame source
for the SPI serial frame.
Return Format
<source><NL>
See Also •
•
•
•
424
(see page 564)
"Introduction to :TRIGger Commands"
":TRIGger:SPI:SOURce:CLOCk"
":TRIGger:SPI:SOURce:DATA"
":TRIGger:SPI:FRAMing"
on page 332
on page 422
on page 423
on page 419
Agilent 6000 Series Oscilloscopes Programmer's Reference