Waveform:type - Agilent Technologies MSO6102A Programmer's Reference Manual

3
Commands by Subsystem

:WAVeform:TYPE

Query Syntax
:WAVeform:TYPE?
The :WAVeform:TYPE? query returns the acquisition mode associated with
the currently selected waveform. The acquisition mode is set by the
:ACQuire:TYPE command.
Return Format
<mode><NL>
<mode> ::= {NORM | PEAK | AVER | HRES}
If the :WAVeform:SOURce is POD1, POD2, or SBUS, the type is always NORM.
N O T E
See Also •
•
•
•
•
460
(see page 564)
"Introduction to :WAVeform Commands"
":ACQuire:TYPE" on page 148
":WAVeform:DATA" on page 446
":WAVeform:PREamble"
":WAVeform:SOURce"
on page 438
on page 453
on page 456
Agilent 6000 Series Oscilloscopes Programmer's Reference