Hardcopy Commands - Agilent Technologies MSO6102A Programmer's Reference Manual

3
Commands by Subsystem

:HARDcopy Commands

Set and query the selection of hardcopy device and formatting options. See
"Introduction to :HARDcopy Commands"
Table 55 :HARDcopy Commands Summary
Command
:HARDcopy:FACTors {{0 |
OFF} | {1 | ON}} (see
page 225)
:HARDcopy:FFEed {{0 |
OFF} | {1 | ON}} (see
page 226)
:HARDcopy:FILename
<string> (see page
:HARDcopy:FORMat
<format> (see page
:HARDcopy:IGColors {{0
| OFF} | {1 | ON}} (see
page 229)
:HARDcopy:PALette
<palette> (see
page 230)
:HARDcopy:PDRiver
<driver> (see page
Introduction to The HARDcopy subsystem provides commands to set and query the
:HARDcopy
selection of hardcopy device and formatting options such as inclusion of
Commands
instrument settings (FACTors) and generation of formfeed (FFEed).
Reporting the Setup
Use :HARDcopy? to query setup information for the HARDcopy subsystem.
Return Format
The following is a sample response from the :HARDcopy? query. In this
case, the query was issued following the *RST command.
:HARD:FORM BMP;FIL 'print_00';PDR POST;FACT 0;FFE 0;IGC 0;PAL COL
224
Query
:HARDcopy:FACTors? (see
page 225)
:HARDcopy:FFEed? (see
page 226)
:HARDcopy:FILename?
227) (see page 227)
:HARDcopy:FORMat? (see
228) page 228)
:HARDcopy:IGColors?
(see page 229)
:HARDcopy:PALette? (see
page 230)
:HARDcopy:PDRiver? (see
231) page 231)
on page 224.
Options and Query Returns
{0 | 1}
{0 | 1}
<string> ::= quoted ASCII string
<format> ::= {BMP[24bit] | BMP8bit |
PNG | CSV | ASCiixy | BINary |
PRINter0 | PRINter1}
{0 | 1}
<palette> ::= {COLor | GRAYscale}
<driver> ::= {AP2Xxx | AP21xx |
{AP2560 | AP25} | {DJ350 | DJ35} |
DJ6xx | {DJ630 | DJ63} | DJ6Special
| DJ6Photo | DJ8Special | DJ8xx |
DJ9Vip | OJPRokx50 | DJ9xx | GVIP |
DJ55xx | {PS470 | PS47} {PS100 |
PS10} | CLASer | MLASer |
LJFastraster | POSTscript}
Agilent 6000 Series Oscilloscopes Programmer's Reference