3
Commands by Subsystem
:FUNCtion:OPERation
(see
page
564)
Command Syntax
:FUNCtion:OPERation <operation>
<operation> ::= {SUBTract | MULTiply | INTegrate | DIFFerentiate |
FFT | SQRT}
The :FUNCtion:OPERation command sets the desired operation for a
function. (FFT = Fast Fourier Transform, SQRT = square root.)
Query Syntax
:FUNCtion:OPERation?
The :FUNCtion:OPERation? query returns the current operation for the
selected function.
Return Format
<operation><NL>
<operation> ::= {SUBT | MULT | INT | DIFF | FFT | SQRT}
See Also
•
"Introduction to :FUNCtion Commands"
on page 213
Agilent 6000 Series Oscilloscopes Programmer's Reference
217