:SBUS:LIN:PARity
Command Syntax
:SBUS:LIN:PARity <display>
<display> ::= {{1 | ON} | {0 | OFF}}
The :SBUS:LIN:PARity command determines whether the parity bits are
included as the most significant bits (MSB) in the display of the Frame Id
field in the LIN decode bus.
This command is only valid on 4-channel or 4+16-channel oscilloscope models when the
N O T E
automotive CAN and LIN serial decode option (Option AMS) has been licensed.
Query Syntax
:SBUS:LIN:PARity?
The :SBUS:LIN:PARity? query returns the current LIN parity bits display
setting of the serial decode bus.
Return Format
<display><NL>
<display> ::= {0 | 1}
Errors
•
See Also
•
•
Agilent 6000 Series Oscilloscopes Programmer's Reference
(see
page
564)
"- 241, Hardware missing"
"Introduction to :SBUS Commands"
":TRIGger:LIN Commands"
on page 535
on page 293
on page 400
Commands by Subsystem
3
309