Trigger:glitch:qualifier - Agilent Technologies MSO6102A Programmer's Reference Manual

3
Commands by Subsystem

:TRIGger:GLITch:QUALifier

Command Syntax
:TRIGger:GLITch:QUALifier <operator>
<operator> ::= {GREaterthan | LESSthan | RANGe}
This command sets the mode of operation of the glitch pulse width trigger.
The oscilloscope can trigger on a pulse width that is greater than a time
value, less than a time value, or within a range of time values.
Query Syntax
:TRIGger:GLITch:QUALifier?
The :TRIGger:GLITch:QUALifier? query returns the glitch pulse width
qualifier.
Return Format
<operator><NL>
<operator> ::= {GRE | LESS | RANG}
See Also
•
•
•
388
(see page 564)
"Introduction to :TRIGger Commands"
":TRIGger:GLITch:SOURce"
":TRIGger:MODE" on page 338
on page 332
on page 390
Agilent 6000 Series Oscilloscopes Programmer's Reference