Trigger:usb:source:dminus - Agilent Technologies MSO6102A Programmer's Reference Manual

3
Commands by Subsystem

:TRIGger:USB:SOURce:DMINus

Command Syntax
:TRIGger:USB:SOURce:DMINus <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital0,..,DIGital15} for the MSO models
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :TRIGger:USB:SOURce:DMINus command sets the source for the USB
D- signal.
Query Syntax
:TRIGger:USB:SOURce:DMINus?
The :TRIGger:USB:SOURce:DMINus? query returns the current source for
the USB D- signal.
Return Format
<source><NL>
See Also •
•
•
•
432
(see page 564)
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 338
":TRIGger:USB:SOURce:DPLus"
":TRIGger:USB:TRIGger"
on page 332
on page 433
on page 435
Agilent 6000 Series Oscilloscopes Programmer's Reference