Trigger:tv:mode - Agilent Technologies MSO6102A Programmer's Reference Manual

:TRIGger:TV:MODE

Command Syntax
:TRIGger:TV:MODE <mode>
<mode> ::= {FIEld1 | FIEld2 | AFIelds | ALINes | LINE | VERTical
The :TRIGger:TV:MODE command selects the TV trigger mode and field.
The LVERtical parameter is only available when :TRIGger:TV:STANdard is
GENeric. The LALTernate parameter is not available when
:TRIGger:TV:STANdard is GENeric.
Old forms for <mode> are accepted:
<mode>
FIEld1
FIEld2
AFIelds
ALINes
LFIeld1
LFIeld2
LALTernate
LVERtical
Query Syntax
:TRIGger:TV:MODE?
The :TRIGger:TV:MODE? query returns the TV trigger mode.
Return Format
<value><NL>
<value> ::= {FIE1 | FIE2 | AFI | ALIN | LINE | VERT | LFI1 | LFI2
See Also •
•
•
Agilent 6000 Series Oscilloscopes Programmer's Reference
(see page 564)
| LFIeld1 | LFIeld2 | LALTernate | LVERtical}
| LALT | LVER}
"Introduction to :TRIGger Commands"
":TRIGger:TV:STANdard"
":TRIGger:MODE" on page 338
Old Forms Accepted
F1
F2
ALLFields, ALLFLDS
ALLLines
LINEF1, LINEFIELD1
LINEF2, LINEFIELD2
LINEAlt
LINEVert
on page 332
on page 430
Commands by Subsystem
3
427