Operegister:condition (Operation Status Condition Register) - Agilent Technologies MSO6102A Programmer's Reference Manual

3
Commands by Subsystem

:OPERegister:CONDition (Operation Status Condition Register)

Query Syntax
:OPERegister:CONDition?
The :OPERegister:CONDition? query returns the integer value contained in
the Operation Status Condition Register.
Table 43 Operation Status Condition Register
Bit
15-13
12
11
10-6
5
4
3
2-0
122
(see page 564)
Name Description
--- ---
HWE Hardware Event
OVLR Overload
--- ---
Wait Wait Trig
Trig
--- ---
Run Running
--- ---
When Set (1 = High = True), Indicates:
(Not used.)
A hardware event has occurred..
A 50Ω input overload has occurred.
(Not used.)
The trigger is armed (set by the Trigger Armed
Event Register (TER)).
(Not used.)
The oscilloscope is running (not stopped).
(Not used.)
Agilent 6000 Series Oscilloscopes Programmer's Reference