Trigger:can:acknowledge - Agilent Technologies MSO6102A Programmer's Reference Manual

5
Obsolete and Discontinued Commands

:TRIGger:CAN:ACKNowledge

Command Syntax
:TRIGger:CAN:ACKNowledge <value>
<value> ::= {0 | OFF}
This command was used with the N2758A CAN trigger module for
54620/54640 Series mixed- signal oscilloscopes. The 6000 Series
oscilloscopes do not support the N2758A CAN trigger module.
Query Syntax
:TRIGger:CAN:ACKNowledge?
The :TRIGger:CAN:ACKNowledge? query returns the current CAN
acknowledge setting.
Return Format
<value><NL>
<value> ::= 0
See Also
•
•
•
528
(see page 564)
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 338
":TRIGger:CAN:TRIGger"
on page 332
on page 352
Agilent 6000 Series Oscilloscopes Programmer's Reference