Trigger:glitch:polarity - Agilent Technologies MSO6102A Programmer's Reference Manual

:TRIGger:GLITch:POLarity

Command Syntax
:TRIGger:GLITch:POLarity <polarity>
<polarity> ::= {POSitive | NEGative}
The :TRIGger:GLITch:POLarity command sets the polarity for the glitch
pulse width trigger.
Query Syntax
:TRIGger:GLITch:POLarity?
The :TRIGger:GLITch:POLarity? query returns the glitch pulse width trigger
polarity.
Return Format
<polarity><NL>
<polarity> ::= {POS | NEG}
See Also
•
•
•
Agilent 6000 Series Oscilloscopes Programmer's Reference
(see page 564)
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 338
":TRIGger:GLITch:SOURce"
on page 332
on page 390
Commands by Subsystem
3
387