Hardcopy:factors - Agilent Technologies MSO6102A Programmer's Reference Manual

3
Commands by Subsystem

:HARDcopy:FACTors

(see page 564)
Command Syntax
:HARDcopy:FACTors <factors>
<factors> ::= {{OFF | 0} | {ON | 1}}
The HARDcopy:FACTors command controls whether the scale factors are
output on the hardcopy dump.
Query Syntax
:HARDcopy:FACTors?
The :HARDcopy:FACTors? query returns a flag indicating whether scale
factors are output on the hardcopy.
Return Format
<factors><NL>
<factors> ::= {0 | 1}
See Also
• "Introduction to :HARDcopy Commands" on page 224
Agilent 6000 Series Oscilloscopes Programmer's Reference 225