Marker:xdelta - Agilent Technologies MSO6102A Programmer's Reference Manual

:MARKer:XDELta

Query Syntax
:MARKer:XDELta?
The MARKer:XDELta? query returns the value difference between the
current X1 and X2 cursor positions.
Xdelta = (Value at X2 cursor) - (Value at X1 cursor)
If the front-panel cursors are off or are set to Binary or Hex Mode, the marker position
N O T E
values are not defined. Make sure to set :MARKer:MODE to MANual to put the cursors in
the front-panel Normal mode.
Return Format
<value><NL>
<value> ::= difference value in NR3 format.
See Also
•
•
•
•
•
•
Agilent 6000 Series Oscilloscopes Programmer's Reference
(see page 564)
"Introduction to :MARKer Commands"
":MARKer:MODE" on page 234
":MARKer:X1Position"
":MARKer:X2Position"
":MARKer:X1Y1source"
":MARKer:X2Y2source"
on page 233
on page 235
on page 237
on page 236
on page 238
Commands by Subsystem
3
239