3
Commands by Subsystem
:PRINt
Command Syntax
:PRINt [<options>]
<options> ::= [<print option>][,..,<print option>]
<print option> ::= {COLor | GRAYscale | PRINter0 | BMP8bit | BMP | PNG
The <print option> parameter may be repeated up to 5 times.
The PRINt command formats the output according to the currently
selected format (device). If an option is not specified, the value selected in
the Print Config menu is used. Refer to
for more information.
See Also
•
•
•
•
•
•
130
(see
page
564)
| NOFactors | FACTors}
"Introduction to Root (:) Commands"
"Introduction to :HARDcopy Commands"
":HARDcopy:FORMat"
":HARDcopy:FACTors"
":HARDcopy:GRAYscale"
":DISPlay:DATA"
on page 196
":HARDcopy:FORMat"
on page 102
on page 224
on page 228
on page 225
on page 510
Agilent 6000 Series Oscilloscopes Programmer's Reference
on page 228