Waveform:yreference - Agilent Technologies MSO6102A Programmer's Reference Manual

3
Commands by Subsystem

:WAVeform:YREFerence

Query Syntax
:WAVeform:YREFerence?
The :WAVeform:YREFerence? query returns the y- reference value for the
currently specified source. This value specifies the data point value where
the y- origin occurs. In this product, this is the data point value of the
center of the screen. It is undefined if the format is ASCii.
Return Format
<value><NL>
<value> ::= y-reference value in the current preamble in 32-bit
See Also
•
•
•
Example Code •
468
(see page 564)
NR1 format
"Introduction to :WAVeform Commands"
":WAVeform:PREamble"
":WAVeform:YORigin"
"Example Code" on page 454
on page 438
on page 453
on page 467
Agilent 6000 Series Oscilloscopes Programmer's Reference