Trigger:lin:trigger - Agilent Technologies MSO6102A Programmer's Reference Manual

:TRIGger:LIN:TRIGger

Command Syntax
:TRIGger:LIN:TRIGger <condition>
<condition> ::= {SYNCbreak | ID}
The :TRIGger:LIN:TRIGger command sets the LIN trigger on condition to be
Sync Break (SYNCbreak) or Frame Id (ID).
The ID option is available when the automotive CAN and LIN serial decode option (Option
N O T E
AMS) has been licensed.
Query Syntax
:TRIGger:LIN:TRIGger?
The :TRIGger:LIN:TRIGger? query returns the current LIN trigger value.
Return Format
<condition><NL>
<condition> ::= {SYNC | ID}
Errors
•
See Also •
•
•
•
Agilent 6000 Series Oscilloscopes Programmer's Reference
(see page 564)
"- 241, Hardware missing"
"Introduction to :TRIGger Commands"
":TRIGger:MODE" on page 338
":TRIGger:LIN:SIGNal:DEFinition"
":TRIGger:LIN:SOURce"
on page 535
on page 332
on page 530
on page 404
Commands by Subsystem
3
407