:SBUS:SPI:WIDTh
Command Syntax
:SBUS:SPI:WIDTh <word_width>
<word_width> ::= integer 4-16 in NR1 format
The :SBUS:SPI:WIDTh command determines the number of bits in a word
of data for SPI.
This command is only valid on 4-channel or 4+16-channel oscilloscope models when the
N O T E
low-speed IIC and SPI serial decode option (Option LSS) has been licensed.
Query Syntax
:SBUS:SPI:WIDTh?
The :SBUS:SPI:WIDTh? query returns the current SPI decode word width.
Return Format
<word_width><NL>
<word_width> ::= integer 4-16 in NR1 format
Errors
•
See Also
•
•
•
Agilent 6000 Series Oscilloscopes Programmer's Reference
(see
page
564)
"- 241, Hardware missing"
"Introduction to :SBUS Commands"
":SBUS:MODE"
on page 310
":TRIGger:SPI Commands"
on page 535
on page 293
on page 416
Commands by Subsystem
3
311