Measure:vstop - Agilent Technologies MSO6102A Programmer's Reference Manual

5
Obsolete and Discontinued Commands

:MEASure:VSTOp

Command Syntax
:MEASure:VSTOp <vstop_argument>
<vstop_argument> ::= value for Y2 cursor
The :MEASure:VSTOp command moves the vertical marker 2 (Y2 cursor) to
the specified value corresponding to the selected source. The source can
be selected by the MARKer:X2Y2source command.
The short form of this command, VSTO, does not follow the defined Long Form to Short
N O T E
Form Truncation Rules (see
both VSTArt and VSTOp, so sending VST for the VSTOp command produces an error.
The :MEASure:VSTOp command is an obsolete command provided for compatibility to
N O T E
previous oscilloscopes. Use the :MARKer:Y2Position command (see
Query Syntax
:MEASure:VSTOp?
The :MEASure:VSTOp? query returns the current value of the Y2 cursor.
Return Format
<value><NL>
<value> ::= value of the Y2 cursor in NR3 format
See Also
•
•
•
•
•
•
•
•
•
524
(see page 564)
"Introduction to :MARKer Commands"
"Introduction to :MEASure Commands"
":MARKer:Y1Position"
":MARKer:Y2Position"
":MARKer:YDELta" on page 242
":MARKer:X2Y2source"
":MEASure:SOURce"
":MEASure:TDELta" on page 513
":MEASure:TSTArt" on page 517
page 566). The normal short form, VST, would be the same for
on page 233
on page 248
on page 240
on page 241
on page 238
on page 270
Agilent 6000 Series Oscilloscopes Programmer's Reference
page 241) instead.