Save, Recall And Delete An Instrument State; Saving An Instrument State - Agilent Technologies N9310A User Manual

Save, Recall and Delete an Instrument State

Saving an Instrument State

N9310A User's Guide
The signal generator allows you to save instrument states
either in local memory or to an external USB memory stick
in a format of a configuration file (*.cfg). You can also recall
those states from the local memory or an external flash
memory for a quick start of commonly used instrument
states or some particular applications' configurations.
Before you unplug a USB memory stick from the USB connector on the
NO TE
front or rear panel of the signal generator, you are recommended to set
the file catalog to Local first.
All the instrument states are saved in the file format of
"<file name>.cfg" , such as "sample.cfg".
The file name can be modified with the 26 lowercase letters
from a to z and 10 arabic numbers from 0 to 9.
The signal generator provides up to 20 files memory spaces
in the local memory.
Saving an instrument state in the local memory
Refer to the following steps to save an instrument state in
the local memory:
1
Pressing
2
Pressing
instrument state you are going to save
3
Edit the file name by rotating the knob and pressing
softkey for entering each letter or number
4
Pressing
the instrument state into local memory immediately
See the example on the next page for how to editing the file
name.
> Catalog > Local
File
Save
softkey enables editing a file name for the
Save now
softkey confirms the file name and saves
Using Functions
sets file catalog to local memory
3
Next
49