Command Differences From 54620/54640 Series Oscilloscopes - Agilent Technologies MSO6102A Programmer's Reference Manual

1
What's New

Command Differences From 54620/54640 Series Oscilloscopes

The main differences between the version 1.00 programming command set
for the 6000 Series oscilloscopes and the 54620/54640 Series oscilloscopes
are related to:
• :HARDcopy and :DISPlay command subsystem changes for USB printers
• New standards supported by the :TRIGger:TV commands.
• Support for 113xA Series probes.
• New "RAW" :WAVeform:POINts option for retrieving raw acquisition
• Discontinuance of the common commands for macros.
More detailed descriptions of the new, changed, obsolete, and discontinued
commands appear below.
New Commands
Command
:ACQuire:RSIGnal (see
:CHANnel<n>:PROBe:ID? (see
:CHANnel<n>:PROBe:STYPe (see
:CHANnel<n>:VERNier (see
:DIGital<n>:SIZE (see
:EXTernal:PROBe:ID (see
:EXTernal:PROBe:STYPe (see
:HARDcopy:FILename (see
:HARDcopy:PDRiver (see
:HARDcopy:IGColors (see
26
and the high resolution color display.
record data.
page 146)
page
page 191)
page
page
page
page
page
Description
Selects the 10 MHz reference signal mode.
page 178) Returns the type of probe attached to the
specified oscilloscope channel.
page 180) Sets the channel probe signal type (STYPe) to
differential or single-ended when using the
113xA Series probes, and determines how
offset is applied.
185) Specifies whether the channel's vernier (fine
vertical adjustment) setting is ON (1) or OFF (0).
Specifies the size of digital channels on the
display.
207) Returns the type of probe attached to the
external trigger input.
208) Sets the external trigger probe signal type
(STYPe) to differential or single-ended when
using the 113xA Series probes, and determines
how offset is applied.
227) Sets the output filename for print formats
whose output is a file. Replaces the 5462x/4x
:HARDcopy:DESTination (see
command.
231) Sets the hardcopy printer driver.
229) Specifies whether graticule colors are inverted.
Agilent 6000 Series Oscilloscopes Programmer's Reference
page 508)