Tst (Self Test) - Agilent Technologies MSO6102A Programmer's Reference Manual

3
Commands by Subsystem

*TST (Self Test)

Query Syntax
*TST?
The *TST? query performs a self- test on the instrument. The result of the
test is placed in the output queue. A zero indicates the test passed and a
non- zero indicates the test failed. If the test fails, refer to the
troubleshooting section of the Service Guide.
Return Format
<result><NL>
<result> ::= 0 or non-zero value; an integer in NR1 format
See Also
•
98
(see page 564)
"Introduction to Common (*) Commands" on page 77
Agilent 6000 Series Oscilloscopes Programmer's Reference