Trigger:glitch:range - Agilent Technologies MSO6102A Programmer's Reference Manual

:TRIGger:GLITch:RANGe

Command Syntax
:TRIGger:GLITch:RANGe <greater than time>[suffix],
<greater than time> ::= start time (10 ns - 9.99 seconds) in NR3 format
<less than time> ::= stop time (15 ns - 10 seconds) in NR3 format
[suffix] ::= {s | ms | us | ns | ps}
The :TRIGger:GLITch:RANGe command sets the pulse width duration for
the selected :TRIGger:GLITch:SOURce. If you set the stop time before the
start time, the order of the parameters is automatically reversed.
Query Syntax
:TRIGger:GLITch:RANGe?
The :TRIGger:GLITch:RANGe? query returns the pulse width duration time
for :TRIGger:GLITch:SOURce.
Return Format
<start time>,<stop time><NL>
See Also
•
•
•
•
Agilent 6000 Series Oscilloscopes Programmer's Reference
(see page 564)
<less than time>[suffix]
"Introduction to :TRIGger Commands"
":TRIGger:GLITch:SOURce"
":TRIGger:GLITch:QUALifier"
":TRIGger:MODE" on page 338
on page 332
on page 390
on page 388
Commands by Subsystem
3
389