:MERGe
Command Syntax
:MERGe <pixel memory>
<pixel memory> ::= {PMEMory0 | PMEMory1 | PMEMory2 | PMEMory3
The :MERGe command stores the contents of the active display in the
specified pixel memory. The previous contents of the pixel memory are
overwritten. The pixel memories are PMEMory0 through PMEMory9. This
command is similar to the function of the "Save To: INTERN_<n>" key in
the Save/Recall menu.
See Also
•
•
•
•
•
Agilent 6000 Series Oscilloscopes Programmer's Reference
(see
page
564)
| PMEMory4 | PMEMory5 | PMEMory6 | PMEMory7
| PMEMory8 | PMEMory9}
"Introduction to Root (:) Commands"
"*SAV (Save)"
on page 92
"*RCL (Recall)"
on page 88
":VIEW"
on page 137
":BLANk"
on page 109
Commands by Subsystem
on page 102
3
119