Display:persistence - Agilent Technologies MSO6102A Programmer's Reference Manual

3
Commands by Subsystem

:DISPlay:PERSistence

Command Syntax
:DISPlay:PERSistence <value>
<value> ::= {MINimum | INFinite}
The :DISPlay:PERSistence command specifies the persistence setting.
MINimum indicates zero persistence and INFinite indicates infinite
persistence. Use the :DISPlay:CLEar or :CDISplay root command to erase
points stored by infinite persistence.
Query Syntax
:DISPlay:PERSistence?
The :DISPlay:PERSistence? query returns the specified persistence value.
Return Format
<value><NL>
<value> ::= {MIN | INF}
See Also
•
•
•
200
(see page 564)
"Introduction to :DISPlay Commands"
":DISPlay:CLEar" on page 195
":CDISplay" on page 110
on page 193
Agilent 6000 Series Oscilloscopes Programmer's Reference