Waveform:xorigin - Agilent Technologies MSO6102A Programmer's Reference Manual

3
Commands by Subsystem

:WAVeform:XORigin

Query Syntax
:WAVeform:XORigin?
The :WAVeform:XORigin? query returns the x- origin value for the currently
specified source. XORigin is the X- axis value of the data point specified by
the :WAVeform:XREFerence value. In this product, that is always the
X- axis value of the first data point (XREFerence = 0).
Return Format
<value><NL>
<value> ::= x-origin value in the current preamble in 64-bit
See Also
•
•
•
Example Code •
464
(see page 564)
floating point NR3 format
"Introduction to :WAVeform Commands"
":WAVeform:PREamble"
":WAVeform:XREFerence"
"Example Code" on page 454
on page 438
on page 453
on page 465
Agilent 6000 Series Oscilloscopes Programmer's Reference