Channel<N>:Pmode - Agilent Technologies MSO6102A Programmer's Reference Manual

5
Obsolete and Discontinued Commands
:CHANnel<n>:PMODe
(see page 564)
Command Syntax
:CHANnel<n>:PMODe <pmode value>
<pmode value> ::= {AUTo | MANual}
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The probe sense mode is controlled internally and cannot be set. If a
probe with sense is connected to the specified channel, auto sensing is
enabled; otherwise, the mode is manual.
If the PMODe sent matches the oscilloscope's setting, the command will be
accepted. Otherwise, a setting conflict error is generated.
The :CHANnel<n>:PMODe command is an obsolete command provided for compatibility to
N O T E
previous oscilloscopes.
Query Syntax
:CHANnel<n>:PMODe?
The :CHANnel<n>:PMODe? query returns AUT if an autosense probe is
attached and MAN otherwise.
Return Format
<pmode value><NL>
<pmode value> ::= {AUT | MAN}
Agilent 6000 Series Oscilloscopes Programmer's Reference 501