Names Of Each Part - Mitsubishi Electric MELSEC-Q QD75M User Manual

4 INSTALLATION, WIRING AND MAINTENANCE OF THE PRODUCT

4.1.2 Names of each part

No.
(1) RUN indicator LED, ERR indicator LED
(2) Axis display LED (AX1 to AX4)
(3) External device connector
(4) SSCNET cable connector
(1) The part names of the QD75 are shown below:
For QD75M4
QD75M4
RUN AX1
AX2
AX3
ERR AX4
QD75M4
AX3 AX1
AX4 AX2
Name
(1) RUN indicator LED, ERR indicator LED
(2) Axis display LED
(3) External device connector
(40-pin connector)
AX1: Axis 1
AX2: Axis 2
AX3: Axis 3
AX4: Axis 4
Refer to Section 3.4.2 "Signal layout for external
device connection connector" for details.
(4) SSCNET cable connector
Refer to the next page.
A connector connected with a drive unit, mechanical system
input, or manual pulse generator.
A connector connected with servo amplifier.
4 - 3
MELSEC-Q
Details