Acceleration/Deceleration Time Change Function - Mitsubishi Electric MELSEC-Q QD75M User Manual

12 CONTROL SUB FUNCTIONS

12.5.3 Acceleration/deceleration time change function

[For an acceleration/deceleration time change disable setting]
Cd.12 Acceleration/deceleration
[For an acceleration/deceleration time change enable setting]
Cd.12 Acceleration/deceleration
The "acceleration/deceleration time change function" is used to change the
acceleration/deceleration time during a speed change to a random value when
carrying out the speed change indicated in Section 12.5.1 "Speed change function".
In a normal speed change (when the acceleration/deceleration time is not changed),
the acceleration/deceleration time previously set in the parameters (
and Pr.25 to Pr.30
and Da.4 , and control is carried out with that acceleration/deceleration time.
However, by setting the new acceleration/deceleration time (
control data, and issuing an acceleration/deceleration time change enable command
( Cd.12 Acceleration/deceleration time change during speed change, enable/disable
selection) to change the speed when the acceleration/deceleration time change is
enabled, the speed will be changed with the new acceleration/deceleration time
Cd.10 Cd.11
( , ).
The details shown below explain about the "acceleration/deceleration time change
function".
[1] Control details
[2] Precautions during control
[3] Setting the acceleration/deceleration time change function
[1] Control details
The following drawing shows the operation during an acceleration/deceleration
time change.
time change during
speed change, enable/
disable selection
time change during
speed change, enable/
disable selection
Fig. 12.29 Operation during an acceleration/deceleration time change
values) is set in the positioning parameter data items Da.3
V
Operation with the acceleration/deceleration
time set in Da. 3 and Da. 4 .
Cd.15 Speed
change request
Disabled
V
Operation with the acceleration/deceleration
time ( Cd. 10 and Cd. 11 ) set in the buffer memory.
Cd.15 Speed
change request
Disabled Enabled
12 - 47
MELSEC-Q
Pr.9 Pr.10
,
Cd.10 , Cd.11 ) in the
t
t
,