Mitsubishi Electric MELSEC-Q QD75M User Manual page 126

5 DATA USED FOR POSITIONING CONTROL
Pr.24 Manual pulse generator input selection
Set the manual pulse generator input pulse mode. (Only the value specified
against the axis 1 is valid.)
0: A-phase/B-phase; multiplied by 4
1: A-phase/B-phase; multiplied by 2
2: A-phase/B-phase; multiplied by 1
3: PLS/SIGN
Pr.200 Speed-position function selection
Select the mode of speed-position switching control.
0: INC mode
2: ABS mode
Note1: If the setting is other than 0 and 2, operation is performed in the INC mode
with the setting regarded as 0.
5 - 35
MELSEC-Q