Mitsubishi Electric MELSEC-Q QD75M User Manual page 50

2 SYSTEM CONFIGURATION
Part name
SSCNET cable
Applicable connector
Applicable wire size
: = Cable length (05: 0.5m (1.64ft.), 1: 1m (3.28ft.), 5: 5m (16.40ft.) )
(Note): The overall extension of the SSCNET cable is up to 30m.
Type
• Connection between QD75M
Jr/MR-J2M-B)
• Connection between (MR-J2-B/MR-J2S-B/MR-J2-Jr/MR-J2M-B) and
MR-J2HBUS M
(MR-J2-B/MR-J2S-B/MR-J2-Jr/MR-J2M-B).
(0.5m(1.64ft.), 1m(3.28ft.), 5m(16.4ft.) )
• MR-J2CN1: connector set (sold separately)
• Connection between QD75M /MR-J2-B/MR-J2S-B/MR-J2-Jr/MR-
J2M-B and MR-H-BN/MR-H-BN4.
MR-J2HBUS M-A
(0.5m(1.64ft.), 1m(3.28ft.), 5m(16.4ft.) )
• MR-J2CN1-A: connector set (sold separately)
• Connection between MR-H-BN/MR-H-BN4 and MR-H-BN/MR-H-BN4
MR-HBUS M (0.5m(1.64ft.), 1m(3.28ft.), 5m(16.4ft.) )
• MR-HBCNS: connector set (sold separately)
A6CON1, A6CON2, A6CON3, A6CON4 (sold separately)
2
0.3 mm (when A6CON1and A6CON4 are used), AWG#24 to 28 (when A6CON2 is used),
AWG#28 (twisted)/AWG#30 (single wire) (when A6CON3 is used)
Specifications of recommended manual pulse generator
Item
Model name
Pulse resolution
Output method
Power supply voltage
Current consumption
Life time
Permitted axial loads
Operation temperature
Weight
Number of max. revolution
Pulse signal status
Friction torque
Remarks
and (MR-J2-B/MR-J2S-B/MR-J2-
25PLS/rev (100 PLS/rev after magnification by 4)
Voltage-output (power supply voltage -1V or more),
Output current Max. 20mA
1000000 revolutions (at 200r/min)
Radial load: Max. 19.6N
Thrust load: Max. 9.8N
-10 to 60°C (14 to 140°F )
0.4 (0.88) [kg(lb)]
Instantaneous Max. 600r/min. normal 200r/min
2 signals: A phase, B: phase, 90° phase difference
0.1N/m (at 20°C (68°F))
2 - 5
MELSEC-Q
Specification
MR-HDP01
4.5 to 13.2VDC
60mA